Philips BDL4677XH User Manual

Also see for Signage Solutions BDL4677XH: Brochure & specs

BDL4677XH21NOTE: This item is functional for VGA input only.The options are:• {1024x768 / 1280x768 / 1360x768 / 1366x768}• {1400x1050 / 1680x1050}• {1600x1200 / 1920x1200}• {Auto}: Determines the resolution automatically.The selected settings will become effective after turning off the powerand turning it on again.HDMI clock thresholdAdjust HDMI link clock.• {Min} - 600KHz.(Default)• {Max} - 5000KHz.NOTE: Threshold clock is for HDMI signals only. HDMI Thresholdclock applies to the deviation of HDMI pixel clock. At times, HDMIpixel clock from some devices may not be stable. The display maytreat the unstable signal as video mode change and mute the video.Threshold clock allows for the adjustment of the clock tolerance toavoid video mute.Black level expansionThis feature offers deeper blacks for an even better image quality.The options are: {Off} / {Low} / {Medium} / {High}.NOTE: This item is functional for Video mode input only.Gamma selectionGamma is what controls the overall brightness of an image. Imageswhich are not corrected properly can appear too white or too dark, socontrolling the gamma properly can have a huge influence on the overallpicture quality of your display.The options are: {Native} / {2.2} / {2.4} / {S gamma}.Scan modeChange the display area of the image.• {Overscan} - Display about 95% of the original size of the image.The rest of the areas surrounding the image will be cut off.• {Underscan} - Display the image in its original size.NOTE: This item is functional for Video mode input only.Scan conversionChoose to enable or disable the IP (Interlace to Progressive) conversionfunction.• {Progressive} - Enable the IP conversion function (recommended).Once enabled, the interlace input signal will be converted toprogressive format for better display quality.• {Interlace} - Disable the IP function. This mode is suitable fordisplaying motion pictures, but it increases the chance of imageretention.Film modeChoose to turn on or off the film mode frame conversion function.• {Auto} - Enable the film mode frame conversion function formovies and motion pictures. The display converts a 24 frames-per-second (24 fps) input signal format to DVD video signal format.Once this function is enabled, it is recommended that you set the{Scan conversion} function to {Progressive}.• {Off} - Disable the film mode frame conversion function. This modeis suitable for TV broadcasting and VCR signals.IR controlSelect the operation mode of the remote control when multipledisplays are connected via an RS232C connection.• {Normal} - All displays can be operated normally by the remotecontrol unit.• {Primary} - Designate this display as the primary display for remotecontrol operation. Only this display can be operated by the remotecontrol.• {Secondary} - Designate this display as the secondary display. Thisdisplay can not be operated by the remote control, and will onlyreceive the control signal from the primary display via the RS232Cconnection.• {Lock All} / {Lock all but Volume} / {Lock all but Power} - Lock theremote control function of this display. To unlock, press and hold the[DISPLAY] button on the remote control for 5 (five) seconds..Keyboard controlChoose to enable or disable the display keyboard (control buttons)function.• {Unlock} - Enable the keyboard function.• {Lock All} / {Lock all but Volume} / {Lock all but Power} - Disablethe keyboard function.TilingWith this function you can create a single large-screen matrix (videowall) that consists of up to 150 sets of this display (up to 10-sets onthe vertical and 15-sets on the horizontal sides). This function requiresa daisy-chain connection.TilingH monitorsV monitorsPositionFrame comp.EnableSwitch on delay111NoNoOffExample: 2 x 2 screen matrix (4 displays)H monitors = 2 displaysV monitors = 2 displays1 23 4H monitorsV monitorsPosition