4 Release the button when ‘PROGRAM TO SET VOL. - MILKFOR CAPPUCCINO’ or ‘PROGRAM TO SET VOL. - MILK FORMACCHIATO’ appears on the display., After a few seconds, milk starts to come out the milk frothing pipe.5 When the milk in the cup reaches the required level, press the samebutton again to set the new quantity., After a few seconds, the appliance starts to brew coffee and‘PROGRAM TO SET VOL. - COFF. FOR CAPPUCCINO.’ or‘PROGRAM TO SET VOL. - COFFEE FOR MACCHIATO’ appears onthe display.6 When the coffee in the cup reaches the required level, press thesame button again to set the new quantity., ’SETTING DONE’ appears on the display. The appliance nowproduces the set quantities until you change them again.Preparing frothed milk separately1 Fill the milk jug and insert it into the appliance.2 Place a sufficiently large cup under the milk frothing pipe.3 Press the automatic cappuccino or latte macchiato button twicewithin 3 seconds., The display reads ‘FROTHED MILK’ and after a few seconds theappliance starts to produce frothed milk.Note: If you want some extra frothed milk in your cup, press the previouslyselected button again within 3 seconds after the appliance has stoppedfrothing milk. Keep the button pressed until the cup contains the desiredamount of frothed milk and then release the button.Note:You can interrupt the milk frothing process at any time by pressing thecappuccino or latte macchiato button again.EnglisH164222.002.6507.7.indd 16 31-08-09 17:45