Q-See QR4714 User Manual
                                                                   | |
Contents
| 
installing the dvRinstall the haRd dRive1. Use the provided key to open the DVR’s Hard Disk Drive (HDD) drawer illustration2. Remove screws and carefully open the top cover of the DVR illustration3. Firmly connect the DVR’s power cord into its corresponding receptacle on the harddrive illustration4. Securely insert the data cable into its matching port on hard drive illustration5. Carefully replace the top cover of the DVR and re-attach screwsConneCt dvR to CameRas1. Connect the camera cable to the Video Input port on the DVR illustration2. Follow same procedure for each camera3. To connect a PTZ speed dome to the DVR System, connect the PTZ Camera datacables to your RS485 A & B ports. illustration See PAGEXXX for additional PTZCamera configuration instructions.ConneCt dvR to exteRnal monitoRUsing the included BNC to RCA cable, connect the monitor to the Video Output port ofthe DVR illustrationConneCt poWeR supplY1. Connect cameras’ power supply to outlet(s) illustration2. Connect DVR power supply to outlet illustrationWaRning!Caution: Always turn off the DVR’s power before installingor removing the hard drive!WaRning!Caution: Only use the power adapter supplied with your DVRSystem. Failure to do so may result in system failure. |
Related manuals for Q-See QR4714
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine