Q-See QR4714 User Manual

Q-See QR4714 User Manual Manual pdf 24 page image

Caution: a dynamic address (IP numbers) can change from time to timedepending upon your service provider. If the remote monitoring stopsworking at some point, the IP address may have changed. To check it, goto a website, such as www.myipaddress.com, from a computer attachedto the same router as the DVR to find the new IP address (Image 17).Then repeat steps 1 and 2.IMAge 16 IMAge 17To avoid a change in IP Address by your Internet Service Provider ask your service provider fora static IP address or use a dynamic domain name service to get a domain name that can belinked to your dynamic address. You can register for a domain name (a name rather than anIP number), user name, and password through our company’s www.myq-see.com website.Repeat steps 1 and 2 using the new domain name, username and password. This DVR alsosupports the DDNS service provided by dyndns. For more information on how to use theseservices from the myq-see.com or www.dyndns.com websites.port ForwardingTo access the DVR from a remote computer over the internet port 80 and port 9000 on therouter the DVR is attached to must be set to forward to the IP address. Instructions for mostpopular routers can be found at the Port Forward website.To find the instructions for your specific router:1. Go to www.portforward.com2. Click on the orange “ROUTERS” link in the second paragraph as shown in IMAge 183. On the list of manufacturers, locate the brand and model number of your router andselect NEXT4. Click the orange “DEFAULT GUIDE” link (IMAge 19)WaRning!Caution: a dynamic address (IP numbers) can change from timeto time depending upon your service provider. If the remotemonitoring stops working at some point, the IP address may havechanged. To check it, go to a website, such as www.myipaddress.com, from a computer attached to the same router as the DVR tofind the new IP address (Image 17). Then repeat steps 1 and 2.