Q-See QR4714 User Manual
                                                                   | |
Contents
| 
6. Select EXIT to return to the SYSTEM SETUP menuHDD Format formats the HDD by erasing all of the data and files that are on the disc. Pleasenote: after installing a new hard drive, files cannot be recorded until the hard drive has beenformatted. To format the hard drive, use the following steps:1. From the Main Menu, select DEVICE to open the DEVICE MANAGEMENT menu(IMAge 33)2. Select HDD to open the HDD MANAGEMENT menu (IMAge 34)3. Click on HDD FORMAT button4. A warning will appear asking: “Formatting HDD will erase all data. Are you sure youwish to format?”5. Click OK to continue6. When the formatting has been completed, a SUCCESSFUL FORMAT message willappear and the system will automatically restart.USB Format formats USB devices by erasing all of the data and files that are on the USBdrive. To format the USB drive, use the following steps:1. From the Main Menu, select DEVICE to open the DEVICE MANAGEMENT menu(IMAge 33)2. Select HDD to open the HDD MANAGEMENT menu (IMAge 34)3. Click on USB FORMAT button4. A warning will appear asking: “Formatting USB will erase all data. Are you sure youwish to format?”5. Click OK to continue6. When the formatting has been completed, a SUCCESSFUL FORMAT message willappear and the system will automatically restart.set alarmAlarm configuration options include: alarm buzzer notification for video loss, HDD connectivityproblem alerts, motion detection, and email notifications. |
Related manuals for Q-See QR4714
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine