Q-See QR4714 User Manual
                                                                   | |
Contents
| 
net-vieW pRogRamenable plug-ins and log-in to net-vieWeRPrior to running the Net Viewer program, ensure the pop-up blockers are turned off and theActiveX controls are enabled, as instructed under the Configuring the DVR > Network Setupsection.1. Open an IE Browser window and input the IP address and web port of your DVR (i.e.,http://172.18.6.202/) into the address bar to generate a Net-Viewer User Log-inscreen (IMAge 75)2. Input the PASSWORD and select NETWORK from the NETWORK drop down list.3. Select LOGIN and the Net-Viewer program will show a live feed (IMAge 76)IMAge 75TROUBLESHOOTING: If difficulties are encountered in initiating the log-in screen,make sure the browser’s safety level or firewall settings are not set to high. Refer to theNetwork Setup section to ensure that the network configuration is correct, the systemports are forwarded correctly and ActiveX is enabled.main inteRFaCe oF net-vieWeRThe Net Viewer Program allows remote access to the DVR controls and settings.IMAge 76 |
Related manuals for Q-See QR4714
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine