User Manual for Commercial Series Net DVRPage 54 Total 1216.3 Unit Name and Device IDUnit nameIn the “Display” menu:There is an item called “Unit Name”. The default unit name is “Embedded Net DVR”. Move“Active Frame” to unit name edit box, press【EDIT】key to enter into edit status, you can modifythe unit name. For instructions on how to input characters, please refer to chapter 3.4. Press【ENTER】key to finish modification. Select “Confirm” button and press【ENTER】, you can savethe new unit name and make it take effect. Press “Cancel” button or【ESC】key to abortmodification.Device ID:When you use IR controller to operate DVR, you must use device ID to select DVR. Thedefault device ID of the DVR is “88”. If there is more than one DVR in one place, please set adifferent device ID for each DVR. Otherwise, the IR controller will control all DVRs with thesame device ID at the same time.In “Display” menu, move “Active Frame” to the device ID edit box, in the edit status, youcan use numeric keys to input a new device ID. The device ID can be set between 01-100.After you finish the modification, press “Confirm” button to save and take effect or press“Cancel” to abort modification.
