User Manual for Commercial Series Net DVRPage 75 Total 121Press “Confirm” you go back to “Recording” menu. Press “Confirm” again to save theparameters and return to main menu.Note:1) If record type is “Motion Detect” or other related types, you must setup “MotionDetection” in order to trigger motion recording (refer to chapter 5.10).2) If record type is “Alarm” or other related types, you must setup “Alarms” in order totrigger alarm recording (refer to chapter 5.13).3) The time period is among 00:00—24:00.6.13 External Alarm Input and Relay OutputFor 8-channel DVR, there are 8 external alarm inputs and 4 relay outputs. For 16-channelDVR, there are 16 external alarm inputs and 4 relay outputs. In “Alarms” menu, you can setupeach external alarm input.In main menu, move “Active Frame” to “Alarms” icon and press【ENTER】key to enter intoalarms menu:External alarm input setup:Step 1: Select one alarm input Use【↑】【↓】keys to select one alarm input.Step 2: Alarm typeThis is sensor type. You can select “Normal Open” or “Normal Close” according to thesensor type.Step 3: Enter into “Alarm in Handling” sub menuIn the “Alarms” menu, there are two options for “Alarm Handling” item. One is “Ignore”,
