1071001108-01-CTalkback / NoiseThis screen controls the routing and level of Talkbackand Noise.1. Reset button – Restores factory defaults for theTalkback / Noise Generator.2. Assignment buttons – Select the destination forthe noise or talkback signals. Note that it is possibleto route talkback to the FX devices. This is veryuseful when auditioning and selecting effects.3. Talkback (Measurement) Mic – Adjusts the levelof the talkback signal to the assigned outputs. -Inf(Infi nity) is off.4. Enable (Talkback) – Touch to enable Talkback,touch again to disable Talkback. Unlike the mixer’shold-to-talk Talk button, this button is latching. Whenenabled, the hold-to-talk button is illuminated. Ontablet devices, both Talk and Enable are latching.5. Mic Phantom – Enables 48V phantom power tothe Talkback microphone input.6. Noise Nenerator – Adjusts the level of the noisesignal to the assigned outputs. -Inf (Infinity) is off.7. Enable (Noise) – Touch to enable Noise, touchagain to disable Noise.PressMenuTouchTalkbackMain MixL/RJoe’s MonitorAux 1Aux 2Aux 2Aux 3Aux 3Aux 4Aux 4Aux 5Aux 5Aux 6Aux 6Aux 7Aux 7Aux 8Aux 8Aux 9Aux 9Aux 10Aux 10Aux 11Aux 11Aux 12Aux 12Aux 13Aux 13Aux 14Aux 14DefaultScene:Aux 2Aux 1 Aux 3 Aux 4 Aux 5 Aux 6FX 2FX 1 FX 3 FX 4 FX 5 FX 6Aux 7 Aux 8 Aux 9 Aux 10 Aux 11 Aux 12 Aux 13 Aux 14Talkback(Measurement)MicMicPhantom48VEnable-40.0Enable-40.0NoiseGeneratorTalkback / Noise GeneratorFX 2FX 1 FX 3 FX 4 FX 5 FX 6Aux 2Joe’sMonitor Aux 3 Aux 4 Aux 5 Aux 6 Aux 7 Aux 8 Aux 9 Aux 10 Aux 11 Aux 12 Aux 13 Aux 14MainL/RSelect outputs for Talkback/Noise Generator ResetFXMenu251763224TalkbackTalkback / Noise
