1181001108-01-CCopy and PasteThe TouchMix-30 Pro has a powerful but simple copy and paste function that is operated by the U7 (copy) and U8 (paste) buttons. Copy and Pasteis context sensitive so that what you are looking at is what will be copied. Only like things may be copied and pasted from and to each other. Forexample, a PEQ cannot be pasted to a GEQ. The table below explains what parameters will be copied and pasted.NOTE!: The copy buffer retains the last item of each type that has been copied. If, for example a GEQ setting is copied and then aGate is copied, both will reside in memory. If a GEQ is displayed, Paste will recall the copied GEQ parameters. If a Gate is displayed,Gate parameters will be pasted.To Copy and Paste Parameters:• Navigate to the screen that displays the values to be copied.• For the TouchMix-30 Pro – Press U7, for the TouchMix-8 and TouchMix-16 – Press U2 (Copy)• Navigate to the destination screen.• TouchMix-30 Pro – Press U8, TouchMix-8 and TouchMix-16 – Press U3 (Paste)Let’s say you want to copy the mix that’s on Auxiliary 1 to Auxiliary 5…After set-up is complete, it may be useful to clear the Copy/Paste buffer. This will prevent accidentally pasting parameters during the show. To clearthe Copy / Paste memory:hat is Displayed hat is Copied and PastedMain or Auxiliary Faders View Fader, Mute and PanInput Channel Overview Tab EQ, Compressor, Gate, FX sends, Aux Sends, Digital Gain, Delay, Group Assigns, PolarityInput Channel EQ Tab All channel EQ parametersInput Channel Comp Tab All channel Compressor parametersInput Channel Gate Tab All channel Gate parametersInput Channel FX Tab All channel FX send levelsInput Channel Aux Tab All channel Auxiliary Send levels and Pan positionsInput Channel Setup Tab Recording Arm, Polarity, Delay, Digital Gain, Group assignmentsOutput Channel Overview Tab PEQ, Limiter, FX sends, Aux Sends, Delay, Group Assigns, Polarity, Pick-Off Point (Auxes only)Output Channel PEQ Tab All channel PEQ parametersOutput Channel GEQ Tab All channel GEQ parametersOutput Channel Anti-Feedback Tab All channel Anti-feedback parametersPressHomeTouch anAux BankTouch anAux ChannelPressU7 / U2CopyTouch anAux ChannelPressU8 / U3PasteAux 1 Aux 5Inputs 1-8Aux Out 1-8U7 U2 U8 U3PressMenuTouchCopy/PasteTouchYesMenu YesCopy / PasteCopy and Paste
