91001108-01-CSave Your ork as a SceneYou’ve put some effort into setting up your mix so now would be a great time to save it. A Scene is a snapshot of all the settings on the mixer.TIP!: It's a good idea to save your scene with the outputs muted or levels down. Why? Because it's possible that the gain settingson power amplifiers or powered loudspeakers have changed since the scene was saved. Recalling the scene could result in a blast offeedback from all the speakers connected to the mixer.To Save Your Scene: Menu Scenes Save/Save AsTo Name Your Scene: Save Scene As: Saturday NightTo Save Your Scene: Mixer USBStorage LocationSaveSound CheckBefore connecting anything, plug in your TouchMix and make sure that all the inputs and Auxiliary Outputs are muted. This will prevent uncontrolledfeedback if a microphone is patched into a hot channel.To Mute Channels:Inputs 1-8 Inputs 9-16 Inputs 17-24 Stereo In/2-Trk Aux Masters Aux Out 9-14Mute Mute Mute Mute Mute Mute Mute Mute Mute Mute Mute MuteIn each of the groups of faders, press the Mute button for each channel. Now you can connect the mixer to sources and speaker systems.Using TouchMix with QSC Amplifiers and LoudspeakersIf you’re using QSC E, K, K.2, K or KLA loudspeakers or NXD amplifiers your TouchMix can recommended input levelsettings to help optimize your system gain structure as well as offering output presets for different applications.For Main L/R: Main Setup Select an amplifier or loudspeaker series.For Aux outputs: Aux MastersAux 1 Setup Select an amplifier or loudspeaker series.Loudspeaker Gain and Preset Pop-upIn addition to displaying the recommended input gain setting (1) for the selectedloudspeaker (2), the pop-up displays a choice of presets (3) for the loudspeaker. Formost QSC loudspeaker there are options that optimize the loudspeaker for live soundreinforcement, stage monitor use or dance music playback.In the pop-up all you need to do is:1. Touch the button associated with your loudspeaker, or amplifier2. Adjust your equipment as instructed3. Select the preset you want to use with your loudspeakers4. Touch Recall Preset. Recall Preset0dBGAINOFF +10dBRotate Gain knob 5 detents (clicks) past zero.Select QSC Speaker Model and Preset Name to display Gain Settings or Recall a PresetK10.2K10.2K12.2K8.2Preset NameModelStudioDanceFloor MonitorLive BrightLiveVocal MonitorDone312
