Pocket PC Phone User Manual 69GettingConnectedn Today Screen: Open the Today Screen. If the device has detected a WLAN networkconnection, the W icon is shown on the top right, and a WLAN icon is shown on the bottomright.n Wireless Manager: Select Wireless Manager from the Programs menu. Tap on the WiFiicon to access a channel.The availability and range of your device’s WLAN signals may depend on the number,thickness and location of walls, ceilings or other objects that the wireless signal must passthrough.Turning on WLAN:To use WLAN on your Pocket PC Phone, you need to turn on the internal WLAN antennaon your device:1. Tap the Start menu > Settings > the Connections tab > WLAN.2. On the Main tab, select the Wireless LAN ON check box to turn the WLAN on.When your WLAN is powered on, the LED indicator for Wireless LAN, located on the leftupper corner of your device, will blink green for every 6 seconds to indicate WLAN is on,or alternate between blinking green and blinking blue for every 3 seconds if Bluetooth isalso turned on.Adjusting the Power Save ModeTo save battery power, turn WLAN off when you are not using your Pocket PC Phone. Youcan set the Power Save Mode when turning WLAN on by tapping and dragging the controlbar on the Settings tab.1. Tap the Start menu > Settings > the Connections tab > WLAN.2. Tap the Settings tab, tap and drag the Power Save Mode slider to the desired power savesetting. You can also use the left/right buttons on the navigation pad to move the slider.n Best Performance: No WLAN Power Save. Use only if the absolute highest WLANthroughput is required or if your network configuration does not support these modes.n Best Battery: Uses the least battery power while maintaining a WLAN connection. Thismode significantly reduces the WLAN data throughput. It is not recommended for large filetransfers or when Bluetooth is on.Turning on Auto OffYou can turn off your pocket PC phone's WLAN antenna automatically if no signal is de-tected in order to save battery power. Choose between 2, 3, 4, or 5 minute intervals oncethe box is selected.
