4–Hardware InstallationQLE3044 InstallationNE0154601-00 A 4-3QLE3044 Bracket Removal and ReplacementDepending on the type of system, installation of the QLE3044 requires either along bracket or a short bracket. QLogic provides both of these brackets with theproduct. The brackets for the QLE3044 are different from previous brackets in thatthey slide over the top of the four RJ45 Ethernet jacks.To remove and replace the bracket:1. Remove the screw at the top of the QLE3044 that holds the bracket in place.2. The bracket covers the top of the RJ45 Ethernet jacks. Slide the bracketupward towards the top of the QLE3044 until it clears all of the Ethernetjacks.3. To replace with a different bracket, reverse the process, sliding the newbracket over the Ethernet jacks. Then fasten in place with the screw.The removal and replacement process is illustrated in Figure 4-3 and Figure 4-4,respectively.Figure 4-3. QLE3044 Bracket RemovalFigure 4-4. QLE3044 Bracket Replacement1. Remove screw usinga Phillips screwdriver.2. Slide the bracket upwardBracketuntil it clears the four RJ45Ethernet jacks.2. Fasten the screw usinga Phillips screwdriver.1. Slide the bracket downBracketover the four RJ45Ethernet jacks. RJ45RJ45RJ45RJ45
