C–Flash UpdateFlash Update OptionsC-2 NE0154601-00 AYou are prompted to answer Y(es) or N(o) to allow the upgrading of the Flash tocontinue. Press the Y key to continue.See “QLogic Adapter Flash Update — Windows Server” on page C-3 for moreinformation.LinuxType the following command, where [n] indicates the number of the Ethernetdevice (0, 1, 2, etc.):./nxflash -i [n] --allSee “QLogic Adapter Flash Update — Linux” on page C-8 for more information.NX Live CDTo install the NX Live CD:1. Download the QLogic Live ISO image file from the QLogic Web site,www.qlogic.com.2. Burn the ISO image onto a CD writable media (make sure your system has aCD burner).3. Insert the NX Live CD into the system that contains the QLogic adapter.4. Change any BIOS settings to permit the CD to boot before the other deviceson the system.5. Boot the system from the CD.6. Use the menu options (see “NX Live Menu Options” on page C-3) to showcurrent board information, update the firmware, or reboot the system(remember to remove the NX Live CD if you need to revert back to theoperating system (OS) on the hard disk).Refer to the support page on the on QLogic Web site for more information ondownloading the NX Live CD.NX Live USBTo install the NX Live USB:1. Download the NX Live USB zip image file from the QLogic Web site,www.qlogic.com.2. Insert a USB flash device in a USB slot.
