3 Unpacking the XLSXLS Library Installation Manual 3-33.2 Unpacking the XLSTable 3-1 provides an overview of unpacking the XLS.3.2.1 Remove the PackagingTo remove the packaging, follow these steps:1. Using a pallet jack or forklift, move the shipping containers as close to thedesired installation location as possible. Make sure there is adequate space to rolleach unit off its pallet and into position.Step Task Refer to...1 Remove the packaging Section 3.2.12 Remove the web straps Section 3.2.2 on page 3-53 Attach ramps to the pallet Section 3.2.4 on page 3-114 Remove the shipping restraints Section 3.2.3 on page 3-75 Roll the unit into position Section 3.2.5 on page 3-13Table 3-1 Overview of unpacking the XLSCAUTIONTo prevent interference with the optical barcode reader, light curtainsensors, and cartridge present sensors, do not install the XLS in areasexposed to direct sunlight.
