Quanmax KEMF-4010 User Manual

Contents

Quanmax KEMF-4010 User Manual Manual pdf 18 page image

Chapter 218KEMF-4010 User’sChapter 2Hardware Settings OverviewThis chapter provides the definitions and locations of jumpers, headers, andconnectors.JumpersThe product has several jumpers which must be properly configured to ensurecorrect operation.Figure 3 Jumper ConnectorFor a three-pin jumper (see Figure 3), the jumper setting is designated “1-2” whenthe jumper connects pins 1 and 2. The jumper setting is designated “2-3” when pins2 and 3 are connected and so on. You will see that one of the lines surrounding ajumper pin is thick, which indicates pin No.1.To move a jumper from one position to another, use needle-nose pliers or tweezersto pull the pin cap off the pins and move it to the desired position.