Chapter 229KEMF-4010 User’sTable 33 LVDS1, LVDS Panel ConnectorSignal Name Pin Pin Signal NameNC 2 1 NC+3.3V / +5V* 4 3 +3.3V / +5V*TxclkB- 6 5 TxclkA-TxclkB+ 8 7 TxclkA+GND 10 9 GNDTxoutB0- 12 11 TxoutA0-TxoutB0+ 14 13 TxoutA0+TxoutB1- 16 15 TxoutA1-TxoutB1+ 18 17 TxoutA1+TxoutB2- 20 19 TxoutA2-TxoutB2+ 22 21 TxoutA2+TxoutB3- 24 23 TxoutA3-TxoutB3+ 26 25 TxoutA3+GND 28 27 GNDI2C_Clock 30 29 I2C_DataPitch: 1.25mm Tin Plated [HIROSE DF13-30DP-1.25(24)]Cable: 0C5029003000070L LVDS Port cable, 30-pin 1.25mm to DVI connector with bracket, L=30cm* The voltage is selected by JP11Note： If DVI cable is connecting to LVDS panel connector, the JP11 Pin2-3 should be shorted.Table 34 IR1, IrDA Pin HeaderPin Signal Name1 +5V2 Key3 RXD4 GND5 TXDPitch: 2.54mm [YIMTEX 3321*05SAGR-02]Table 35 PCI1, 32-bit / 33Mhz / 5V-key PCI SlotPin Side B Side A1 -12V Reserved2 Reserved +12V3 Ground Reserved4 Reserved Reserved5 +5V +5V6 +5V INTA#7 INTB# INTC#8 INTD# +5V9 Reserved GNT1# *10 REQ1# * +5V
