Quanmax KEMF-4010 User Manual

Contents

Quanmax KEMF-4010 User Manual Manual pdf 39 page image

Chapter 339KEMF-4010 User’sFigure 11 DIMM Memory and 240-pin SocketInstalling a DIMMCarefully follow the steps below in order to install the DIMMs:To avoid generating static electricity and damaging the DIMM, ground yourself bytouching a grounded metal surface or using a ground strap before you touch the DIMM.1. Do not touch the connectors of the DIMM. Dirt or other residue may cause amalfunction.2. Hold the DIMM with its notch aligned with the memory socket of the KEMF-4010 andinsert it completely into the socket. Lift the locking tabs at each end of the DIMMsocket to lock it in position.3. If you install two DIMMs, install the second DIMM using the same procedure asabove.4. If the DIMM does not go in smoothly, do not force it. Pull it all the way out and tryagain.5. Make sure the DIMM is properly installed and locked by the tabs on both sides of thesocket.Figure 12 Memory Installation