Chapter 3 Configuring Your LibraryLogging On to the Web ClientScalar i500 User’s Guide 53The paths to open the appropriate screens are as follows:• From the web client, select Setup > Setup Wizard.• From the operator panel, the Setup Wizard is available only upon firstpower-on of library.Logging On to the Web ClientOnce you have configured network settings on the operator panel, youcan log on to the library’s web client.The operator panel network configuration screen lists the IP address ofthe library. Use this IP address to access the web client using a Webbrowser. When typing the IP address into the Web browser, make sure toprecede it with http://; for example, http://123.123.123.123.Managing the NetworkAdministrative users can configure the following:• Network settings that allow remote access to the library. For moreinformation, see Modifying Network Settings on page 54.• Secure Socket Layer (SSL) settings that increase data protection sothat data from the library can be sent over the internet securely. Formore information, see Enabling SSL on page 56.• Simple Network Management Protocol (SNMP) settings that allowyou to use an external management application to monitor the statusof the library. For more information, see Configuring SNMP Settingson the Library on page 57.
