82 Running Your Library• You can select only the partitions to which you have been given access.• You can only move media within one partition at a time.You need to provide the following information in the user interface to move media:• Partition — lists the partitions that you have permission to access.• Selected Media — the single cartridge that you want to move.• Selected Destination — the location to which you want to move the cartridge.The paths to open the appropriate screens are as follows:• From the web client, select Operations > Media > Move.• From the operator panel, select Operations > Move Media.For step-by-step procedures, see the library’s online Help. To access the online Help system, click the Helpicon at the top right of the web client or operator panel user interface.Exporting MediaThe Export Media operation enables you to export data cartridges from storage slots to empty I/E stationslots for removal from the library.This topic focuses on using the library user interface, not the host application, to export media. Using thelibrary to export media may necessitate performing an inventory of the library with the host application. Also,if the host application has issued a prevent media removal command, you will not be able to use the libraryuser interface to export media. See your host application documentation for more information.If you have AutoClean enabled, you can also export cleaning cartridges. For information, see ExportingCleaning Media on page 87.Details on exporting cartridges include:• If the partition is online, it will be taken offline before the export operation is performed and broughtback online after the operation is complete. You will be asked to confirm that you want to take thepartition offline.• You can select only the partitions to which you have been given access.• You can only export cartridges if empty I/E station slots are available.• You must have access to the library’s I/E Station and the operator panel to import cleaningcartridges.Note You can filter the list of media by entering all or part of a barcode in the Searchtext box. Use an asterisk (*) to search with wildcards. You can also sort the listby clicking on columns with bold headings. For example, selecting the Locationcolumn heading sorts the list by location coordinatesNote If your library has zero I/E station slots, you cannot import or export media.See Configuring I/E Station Slots on page 49..CAUTION Some host applications may fail import/export operations when the I/E stationcontains cartridges that are assigned to another partition. Move cartridgesfrom the I/E station as soon as possible to avoid possible conflicts with theother partitions.
