Designing and Printing Labels42 Kiaro! 200 User Guide5 Print the labels. The Status Monitor will automatically open and display informationabout printer and job status.The job progress will be displayed in the Status Monitor.If necessary, you can cancel the print job by choosing Cancel Job/Reset Error onthe Status Monitor.6 Receive the printed labels. At the end of the job, cut the label material with themanual cutter.Note: Do not pull the printed labels in any direction as they exit the printer. Pullingthe labels may result in a media jam.Related Topics:- Using the Manual Cutter on page 42Using the Manual CutterAfter completion of label printing, cut the label using the manual cutter.Warning: The cutter blade is sharp. Use caution to avoid personal injury or damageto clothing when working with cutting blades or around exposed blade surfaces.1 Hold the printed label. If the printed label is short, press the FEED key to ejectpaper to the position where you can hold the label with ease.
