Kiaro! 200 Maintenance UtilityKiaro! 200 User Guide 634 Turn the printer power off and then back on to ensure the printer will not enter asleeping state during the shipping process. The printer entering sleep mode at anypoint of the shipping process could result in a failure to complete the shippingprocess correctly.5 Choose Shipping. Follow the on-screen instructions to complete this procedure.The ink will be drained from the printer.6 Power off the printer.7 Pack the printer in its original packing material for shipping.Priming the PrintheadsPriming fills the printhead with ink when a heavy cleaning does not resolve a severe inknon-discharge problem.1 Launch the Kiaro! 200 Maintenance Utility.From the Windows Start Menu, choose Start > All Programs > QuickLabelKiaro! 200 > Kiaro! 200 Maintenance Utility. A language and printer prompt willopen.Select a display language and the Kiaro! 200 printer you want to connect to.Choose OK.2 Choose the Cleaning tab.3 Choose whether to prime the left and/or right printhead.4 Choose Prime. Follow the on-screen instructions to complete this procedure.Refreshing Kiaro! 200D InkDue to pigment components, Kiaro! 200D ink requires periodic refreshing to maintainan optimum mixture. The status monitor will prompt you to refresh ink as needed.Note: This feature applies only to the Kiaro! 200D ink. If you are using the standardKiaro! 200, this procedure is not needed.1 Launch the Kiaro! 200 Maintenance Utility.From the Windows Start Menu, choose Start > All Programs > QuickLabelKiaro! 200 > Kiaro! 200 Maintenance Utility. A language and printer prompt willopen.Select a display language and the Kiaro! 200 printer you want to connect to.Choose OK.2 Choose the Cleaning tab.3 Choose Refresh Ink. Follow the on-screen instructions to complete this procedure.
