Kiaro! 200 Maintenance Utility62 Kiaro! 200 User Guide3 Choose whether to clean the left and/or right printhead.If there are print quality issues with a single printhead, you can save ink by cleaningonly the affected printhead.4 Choose a cleaning option.Three cleaning options are available (light, medium, and heavy). Start with lightcleaning and then print a test label. If the issue is not resolved, repeat using themedium cleaning method. If the issue is still not resolved, repeat using heavycleaning.If multiple heavy cleanings do not resolve the issue, contact Technical Support.Preparing for MovingBefore moving the printer a short distance in your building, such as to a different floor,prepare it using the following instructions. This procedure will drain ink from theprinthead to avoid leakage when moving the printer a short distance.1 Launch the Kiaro! 200 Maintenance Utility.From the Windows Start Menu, choose Start > All Programs > QuickLabelKiaro! 200 > Kiaro! 200 Maintenance Utility. A language and printer prompt willopen.Select a display language and the Kiaro! 200 printer you want to connect to.Choose OK.2 Choose the Cleaning tab.3 Choose Moving. Follow the on-screen instructions to complete this procedure.Preparing for ShippingBefore shipping the printer over long distances, prepare it using the followinginstructions. This procedure will drain ink from the entire printer when shipping theprinter or moving longer distances.1 Ensure the message “Maintenance cartridge near full” is not displayed in the StatusMonitor. If the warning message is displayed, replace the maintenance cartridgewith a new one, and then start the work.Note: If the Shipping function is executed while the warning message is displayed,the maintenance cartridge would be filled with waste ink and the printer would beshut down, incurring extra time.2 Launch the Kiaro! 200 Maintenance Utility.From the Windows Start Menu, choose Start > All Programs > QuickLabelKiaro! 200 > Kiaro! 200 Maintenance Utility. A language and printer prompt willopen.Select a display language and the Kiaro! 200 printer you want to connect to.Choose OK.3 Choose the Cleaning tab.
