Kiaro! 200 Maintenance UtilityKiaro! 200 User Guide 81Turning On Auto-CalibrationIf the top-of-form sensor threshold has been adjusted in the Threshold Adjustmentwindow, the printer will use the adjusted calibration value.Use the auto-calibration feature to disable this adjustment and return the printer to thedefault automatic calibration mode.1 Launch the Kiaro! 200 Maintenance Utility.From the Windows Start Menu, choose Start > All Programs > QuickLabelKiaro! 200 > Kiaro! 200 Maintenance Utility. A language and printer prompt willopen.Select a display language and the Kiaro! 200 printer you want to connect to.Choose OK.2 Choose the Adjustments tab.3 Choose Turn Auto-Calibration On. Top-of-form sensor threshold adjustments willbe cleared and automatic calibration will be enabled.Related Topics:- Adjusting the Top-of-Form Threshold on page 79Adjusting the DensityUse this adjustment if you notice color density differences between the areas printedby each printhead.1 Ensure that 8.35 x 6.1 in. (212 x 155 mm) media is loaded.2 Launch the Kiaro! 200 Maintenance Utility.From the Windows Start Menu, choose Start > All Programs > QuickLabelKiaro! 200 > Kiaro! 200 Maintenance Utility. A language and printer prompt willopen.Select a display language and the Kiaro! 200 printer you want to connect to.Choose OK.3 Choose the Adjustments tab.
