RADVision VIU-323 User Manual

Also see for VIU-323: Quick start

Contents

user guide
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
about this user guide
Introducing the
Introducing the VIU-323
VIU-323 Physical Description
Rear Panel
The OnLAN 323 Product Series
OnLAN 323 Product Collaboration
VIU-323 and MCU-323
An Introduction to H.323
Package Contents
Physical Location
Power Connection
LAN Connection
Connecting to the Console Port
Next Step: Configuration
Planning the Configuration
Configuration PC Requirements
Navigating the Configuration Software Screens
Configuration Checklist
Selecting the VIU-323 for Configuration
Figure 7 - Configuration Source screen
Figure 8 - Software Version screen
Figure 9 - Change Password screen
Figure 10 - Source list of configuration files for VIU-323 configuration parameters
Setting Unit Identification Parameters
Setting Network Parameters
Setting LAN Port Parameters
Setting Dialing Parameters
Saving VIU-323 Configuration Parameters
Figure 15 - Save Setup screen
After Configuration
Setting up a Call
Basic Dialing
Changing Outgoing Bandwidth
Why Change the Default Outgoing Bandwidth?
Dialing Examples
Changing Incoming Bandwidth
Why Change the Default Incoming Bandwidth of the Remote VIU-323?
Changing Both Incoming and Outgoing Bandwidth
Upgrading the
Upgrading the VIU-323 Software
Uploading the New VIU-323 Software Version
Monitoring the
Monitoring the VIU-323
Prerequisites
Modem Connection
LED Indications
Analyzing Problems
Verify Component Interactions
Network Problems
IP Address Problems
RJ-45 LAN Port
RS-232 9-pin Male Connector Pin-Out
Null Modem Cable
Figure 20 - Null modem cable
DCE Mode V.35/RS-366 Y-Cable
Safety Considerations
IP Addressing Scheme
Subnets and Using a Subnet Mask
Hexadecimal Notation
Interfaces
Environmental Requirements

RADVision VIU-323 User Manual Manual pdf 34 page image

Installing the VIU-3233-6Port 1 LAN 1 100-240 VACPOWERPort 2RS-366 FemaleConnectorRS-366FemaleConnectorV.35FemaleConnectorV.35 FemaleConnector26-Pin MaleConnector26-Pin MaleConnectorH.320 Room SystemRS-366 PortV.35 Port V.35 Port RS-366 PortV.35CableV.35CableRS-366CableRS-366CableFigure 5 - Connecting the Y-CableConnecting to the Console PortThe console (serial) port on the front of the VIU-323 is used to connect the VIU-323 to a PCor modem.Use a null modem (crossover) cable to connect the console port’s female 9-pin D-typeconnector to the configuration PC or modem. For information, see “Appendix A.”From VIU-323 to PCConnect the VIU-323 console port to a PC to:

/ 129

This manual is suitable for:

VIU-323

manualsdatabase

Your AI-powered manual search engine