Upgrading the VIU-3237-2Uploading the New VIU-323 Software VersionUse the Software Upload utility to upload the flash file, which contains the latest VIU-323software version." To upload the flash file to the VIU-3231. Turn off the VIU-323.2. Make sure the VIU-323 is connected to the LAN hub.3. Turn on the VIU-323. After the red Test LED goes out, check that the Link LED onthe VIU-323 front panel is on.4. Test that the VIU-323 is connected to the hub by pinging it from the configuration PC.5. Insert the diskette containing the flash file in the drive.6. From the Start button, select Programs\RADVision OnLAN Tools\SoftwareUpload Utility.The Software Upload Utility screen is displayed.Figure 17 - Software Upload Utility screen7. Type the VIU-323’s IP address.8. From the list of files, select the flash file (*.fls) you want to upload. Note: If the flashfile does not appear in the list, select the appropriate path from the Look in: field.
