Complete The Pairing Procedure• When prompted on the phone, verify with the radio password shown on theUconnect® Screen.• If your phone asks you to accept a connection request from Uconnect®, select“Yes.” If available, check the box telling it not to ask again – that way your phonewill automatically connect each time you start the vehicle.Select The Mobile Phone's Priority Level• When the pairing process has successfully completed, the system will prompt youto choose whether or not this is your favorite phone. Selecting “Yes” will make thisphone the highest priority. This phone will take precedence over other pairedphones within range. Only one phone can be paired at a time.• You are now ready to make hands-free calls. Press the Uconnect® Phone button onyour steering wheel to begin.Making A Phone CallTo begin a phone call using Uconnect® Voice Command:• Push the Uconnect® Phone button .• After the BEEP, say “dial” then the number (or “call” then the name as listed inyour phone; see Phonebook).NOTE:You can also initiate a call by using the touchscreen on the Phone main screen.Receiving A Call — Accept (And End)• When an incoming call rings/is announced on Uconnect®, push the Phonebutton .• To end a call, push the Phone button .Mute (Or Unmute) Microphone During Call• During a call, press the “mute” button on the touchscreen to mute and unmutethe call.Transfer Ongoing Call Between Handset And VehicleDuring an on-going call, press the “Transfer” button on the touchscreen to transfer anon-going call between handset and vehicle.E L E C T R O N I C S108
