INTEGRATED TRAILER BRAKE MODULEThe Integrated Trailer Brake Controller allows you to automatically or manuallyactivate the Electric Trailer Brakes and Electric Over Hydraulic Trailer Brakes for abetter braking performance when towing a trailer.NOTE:The Integrated Trailer Brake Controller is located in the center stack below theclimate controls.This module will have four different options depending on the type of trailer you wantto tow and can be selected through the 3.5” Electronic Vehicle Information Center(EVIC) or touchscreen radio.• Light Electric• Heavy Electric• Light EOH (Electric Over Hydraulic)• Heavy EOH (Electric Over Hydraulic)Setting with the Uconnect® Touchscreen Radio To make the proper selection in theUconnect® touchscreen radio, press the More hard-key (Uconnect® 5.0) or the Appssoft-key (Uconnect® 8.4), then press the Settings soft-key to display the menusetting screen and press trailer brake. For additional information, refer to yourOwner’s Manual on the DVD.Setting with a 3.5” EVIC1. Press the RIGHT arrow on the steering wheel to enter “VEHICLE SETTINGS.”2. Press the UP or DOWN buttons until Trailer Brake Type appears on the screen.3. Press the RIGHT arrow and then press the UP or DOWN buttons until the properTrailer Brake Type appears on the screen. For additional information, refer to yourOwner’s Manual on the DVD.U T I L I T Y169
