TONNEAU COVERThe Tonneau Cover can be removed and reinstalled by using the locking clampslocated underneath the Tonneau Cover.NOTE:Be sure that the Tonneau Cover is secured before driving.EASY-OFF TAILGATETo simplify mounting of a camper unit with an overhang, the tailgate can be removed.NOTE:If your vehicle is equipped with a rear camera or RKE the electrical connector mustbe disconnected prior to removing the tailgate.Removing The Tailgate1. Disconnect the wiring harness for the rear camera or RKE (if equipped).2. Unlatch the tailgate and remove the support cables by releasing the lock tangfrom the pivot.3. Raise the right side of the tailgate until the right side pivot clears the hangerbracket.4. Slide the entire tailgate to the right to free the left side pivot.5. Remove the tailgate from the vehicle.NOTE:Do not carry the tailgate loose in the truck pickup box.Locking TailgateThe lock is located next to the tailgate handle. The tailgate can be locked using thevehicle key.WARNING!To avoid inhaling carbon monoxide, which is deadly, the exhaust system onvehicles equipped with “Cap or Slide-In Campers” should extend beyond theoverhanging camper compartment and be free of leaks.U T I L I T Y161
