Memory SeatThe memory seat feature allows you to save the driver's seat position (excluding lumbarposition), driver's outside mirror position, adjustable brake and accelerator pedals,Automatic Temperature Control (ATC) temperature setting and radio station presetsettings. The driver's memory buttons are located on the outboard side of the driver'sseat cushion.• Adjust all memory profile settings,press the middle button S (SET), thenpress 1 or 2 within five seconds.• To program a Key Fob to the memoryposition, place the ignition switch inthe LOCK position and remove the KeyFob, press and release the LOCK but-ton on the Key Fob to be programmedwithin five seconds of pressingbutton 1 or 2.• Press 1 or 2 to recall the saved posi-tions, or press UNLOCK on the pro-grammed Key Fob.Refer to the Owner's Manual on the DVDfor further details.Manual SeatsForward/RearwardLift up on the adjusting bar located at thefront of the seat near the floor and releaseit when the seat is at the desired position.Then, using body pressure, move forwardand backward on the seat to be sure thatthe seat adjusters have latched.ReclinerLift the recliner lever located on the out-board side of the seat, lean back andrelease at the desired position.Memory Seat Button LocationManual Seat Adjusting Bar/Recline Lever1 — Recline Lever2 — Adjusting BarG E T T I N G S T A R T E D30
