Resume• To resume a previously selected set speed in memory, push the RESUME/ACCELswitch and release.Cancel• Push the CANCEL switch or apply the brakes to cancel the set speed and maintainthe set speed memory.• Push the ON/OFF switch to turn the system off and erase the set speed memory.WARNING!• Leaving the Electronic Speed Control system on when not in use is dangerous.You could accidentally set the system or cause it to go faster than you want. Youcould lose control and have a collision. Always leave the Electronic SpeedControl system off when you are not using it.• Electronic Speed Control can be dangerous where the system cannot maintaina constant speed. Your vehicle could go too fast for the conditions, and youcould lose control. A collision could be the result. Do not use Electronic SpeedControl in heavy traffic or on roads that are winding, icy, snow-covered orslippery.EIGHT-SPEED AUTOMATIC TRANSMISSION — IF EQUIPPED• Your vehicle may be equipped with afuel efficient eight-speed transmis-sion. The electronic transmission gearselector is located on the instrumentpanel. The transmission gear (PRND)is displayed both above the shifter con-trol and in the Electronic Vehicle Infor-mation Center (EVIC)/Driver Informa-tion Display (DID).• To select a gear range, simply rotatethe shifter control.NOTE:You must press the brake pedal to shiftthe transmission out of PARK or fromNEUTRAL into DRIVE or REVERSE.• To shift past multiple gear ranges atonce (such as Park to Drive), simply rotate the switch to the appropriate detent.• Select the DRIVE range for normal driving.Rotary Gear SelectorO P E R A T I N G Y O U R V E H I C L E41
