58 CHAPTER FOUR : VCR O PERATIONV C R O P E R AT I O N4Press the REC button.The record indicator onthe control panelilluminates and the VCRbegins recording.Notes:• The VCR automatically stops recording and rewinds when it reaches the end of the tape.• Press the STOP button at any time to stop recording.• We don’t recommend changing tape speeds while a recording is in progress. Doing so may causedistortion of the picture during playback.• When you’re finished recording, rewind the tape to the beginning and remove it from the VCRto protect the tape.• When pressing the REC button on the front panel during DVD playback, the DVD will berecorded on the VCR tape. If your DVD title has been equipped with a Copy Protect technology,it can't be recorded on the VCR tape.• You can play a DVD by switching into the DVD mode during channel recording.• You can't play a DVD by switching into DVD mode during A/V recording.• Mode Switching doesn't operate during recording in DVD mode.2Press the SP/SLP buttonrepeatedly until the speedyou want (SLP or SP)appears.3Select the TV channel youwant to record.Recording TV Programs As You WatchRecording1With your VCR turned on,and with a tape in the unit,press the SP/SLP button.The tape speed appears inon-screen.Be sure the record safety tab is inplace. For information on the recordsafety tab, see page 54. SP (Standard Play) is the mostcommon speed for recording. For moreinformation on tape speeds, see page68.16061510-CHAPTER 4 12/13/02 11:48 AM Page 58
