RCA HD50LPW62B User Manual

Also see for HD44LPW62: Technical specifications

Contents

Connections & Setup10 Chapter 1Using the CableCARD SlotThe CableCARD slot allows you to use a digital cable card to receive digital cable services,including premium and HDTV cable channels, without the need for a set-top box. Please contactyour local cable company to obtain a digital cable card. Depending on your cable company,someone might come to your home to install the digital cable card for you, or they’ll simply sendyou the digital cable card.Important Note: CableCARD service details, availability, restrictions, and pricingare determined by your cable company.When you receive the digital cable card, make sure you connect your coaxial cable to theCABLE INPUT jack. Then, turn on your TV. Insert the digital cable card into the slot on the backof the TV labeled CableCARD. Push firmly on the card until almost the entire card is inserted.Wait to receive information on-screen regarding your digital cable television services. See belowfor information on setting up digital cable television services for your TV.Digital CableCardWhat You Need• Coaxial cable• Digital cable service subscription• Digital cable cardWhat You Need to Know• The coaxial cable from your cable outlet needs to be connected to the CABLE INPUT jack so thedigital cable card can get a signal and receive channel information.• Once the digital cable card is authorized for a particular TV, the card can’t be used with any otherTV, unless it is re-authorized to it.• You won’t receive digital cable channels if you connect your cable to the ANTENNA INPUT. Makesure you connect your cable to the CABLE INPUT.• Once inserted, it is not recommended you remove the digital cable card. In the case it needs tobe removed, grasp firmly, and pull the card straight out.Setting Up Digital Cable Television ServiceOnce you have inserted a digital cable card into the CableCARD slot on the back of the TV (explainedabove), you are ready to receive digital cable channels. Wait approximately 30 seconds for the statusscreen to appear. Write down the information you see and call your cable company to provide themwith the information on-screen.If you experience problems with your digital cable after your digital cable card is set up, try resettingyour card. Go to page 58 for more information. If problems persist, contact your cable company.Notes: If your information screen disappears before you have a chance to write down theinformation, press MENU on the remote to access the menu system. Then press 9, 9, 9, andthe information screen appears. Go to page 58 for more information on the CableCARD Toolsmenu.You can’t order video-on-demand through your digital cable card. Call your local cablecompany to place an order.Coaxial cable