RCA HD50LPW62B User Manual

Also see for HD44LPW62: Technical specifications

Contents

Chapter 4 57Using the TV’s Menu SystemSignal SourceThe Signal Source menu allows you to choose the source from which youwould like the signal to come: Cable Input, Antenna Input, or Video Inputs.The same can be accomplished using the device buttons if you’ve set up AutoTuning on the remote or by pressing the INPUT button. But, if you misplace theremote, this feature gives you another way to tune to a signal source.Go Back0Channel SearchSignal Strength21Auto TuningSignal Source43Special Features5You can select a source from the available signal sources.Press OK to continue.Use this screen if you have misplaced your remote controland need a way to tune to a different antenna or to go tothe video inputs. Use the arrows to highlight the rectanglethen press OK or MENU-OK to scroll to the input you want.Front InputMain Menu4ConnectionsAuto TuningThis menu lets you specify the various devices you have connected to yourTV. It lets you program a device button on the remote control (VCR, AUX•HD,DVD, SAT•CABLE, or AUDIO) so that pressing the button automatically turnson the TV and turns the TV to the correct Video Input Channel (go to Chapter 3for detailed information).Notes: The AUX•HD button by default is set up for an RCA HDTV Tunerreceiver.If you have two RCA satellite receivers, you can control each separately.Program the second receiver with the AUX•HD button using the 5001code. Then use the RCA SAT2 option in the auto tuning menu to set autotuning.Not ConnectedInput 2Not ConnectedChannel SearchSignal StrengthGo Back210Auto TuningSignal Source43Special Features5Front InputMain Menu4ConnectionsPress OK to select the channel or input that is tuned whenthe VCR key is pressed on the remote.Select which input or channel should be automatically tunedwhen a button listed below is pressed on the remote control.RCA SAT2SAT-CABLE (Satellite or Cable Box)DVDVCR2VCR AUDIO (Audio Receiver/Amp)Not ConnectedNot Connected