Chapter 4 49Using the TV’s Menu SystemAudio ConnectionsThe Audio Connections option lets you set up input or outputs associated withaudio. When you select the Audio Connections feature, a submenu appears withoptions: Digital Audio Out and DVI Audio Input.Digital Audio Out1Go Back0Main Menu AudioPress or to point to an option, then press OK toselect it. Press to return to the menu.Audio ConnectionsChoosing Auto Select will send a Dolby Digital signal (whenavailable) out of the DIGITAL AUDIO OUTPUT on the back ofthe TV. If Dolby Digital is not available then a PCM signal issent out of the DIGITAL AUDIO OUTPUT.Choosing PCM will always send a PCM signal out of theDIGITAL AUDIO OUTPUT.PCMAuto SelectDVI Audio Input2Fixed/Variable OutAudio Connections7Balance6Dynamic Bass8SAP5Audio Language4Sound Logic3Audio Processor2Equalizer Presets1Go Back0Main Menu AudioPress or to point to an option, then press OK toselect it. Press to return to the menu.The Audio Connections menu has screens for setting upinputs or outputs that are associated with audio:•Digital Audio Out: Choose either Auto Select or PCM output.•DVI Audio Input: Choose a TV audio input for a DVI device.Digital Audio Out Allows you to receive Dolby Digital surround sound iftransmitted and you’ve connected a six-channel receiver to the TV’sDIGITAL AUDIO OUTPUT jack with a digital optical cable. Choose thecorrect setting in the Digital Audio Out menu:• Auto Select Your TV automatically chooses between Dolby Digitaland PCM based on the audio signal it is receiving. This is the bestselection if you have a decoder with Dolby Digital and PCM that wasmanufactured in the last several years.• PCM (Pulse Code Modulation) The TV sends all signals through theDigital Audio Output in PCM.DVI Audio Input Allows you to select the audio input you’re using ifyou’ve connected an HDMI/DVI cable adapter to the DVI input. Select fromthe inputs listed.Digital Audio Out1DVI Audio Input2Go Back0Main Menu AudioPress or to point to an option, then press OK toselect it. Press to return to the menu.Audio ConnectionsBecause an HDMI output carries the audio signal on the samecable as the video, no setup is needed. However, if youconnect a DVI output to the TV's HDMI input, you need toconnect the separate DVI audio to one of the TV's audioinputs and select that input in this screen. The TV will usethat audio input for sound when it displays a DVI signal.Input 2Input 1Select the TV audio input where the DVI audio is connected.Dynamic BassThe Dynamic Bass option provides additional bass enhancement for the audio.Choose Off, Medium, or High depending on your preference.Assisted Setup6Preferences5Connections4Parental Controls3AudioAudio2Picture Quality1Go Back0Main MenuPress OK orto access the Audio menu.•Signal Strength: Check the signal strength of a channel.•Channel Search: Search for available channels in your area.•Software Upgrade: Check software version and upgrades.•Signal Source: Lost remote? This screen changes inputs.•Video Input Setup: Choose component or composite video.•Auto Tuning: Create one button access to your devices.•Special Features: For advanced users only.•Ethernet Setup: Configure the Ethernet connection settings.The Connections menu has screens for specifying andoptimizing the connections (inputs) to the TV:Fixed/Variable OutAudio Connections7Balance6Dynamic Bass8SAP5Audio Language4Sound Logic3Audio Processor2Equalizer Presets1Go Back0Main Menu AudioPress or to point to an option, then press OK toselect it. Press to return to the menu.A change in the screen is applied to all inputs.MediumOffHighConnections MenuThe Connections menu specifies various ways to adjust the inputs to yourtelevision. Items in the Connections menu are: Signal Strength, Channel Search,Software Upgrade, Signal Source, Video Input Setup, Auto Tuning, SpecialFeatures, and Ethernet Setup.