RCA L26W11 User Manual

Other Information26 Chapter 4Mounting Your TV to the WallCaution: The wall mount must bear a minimum of five timesthe TV’s net weight without causing damage.Your TV comes with a wall mount plate that attaches to the back ofyour TV and allows you to mount the TV to the wall. You need topurchase a VESA compatible wall mount to mount your TV to a wall.Purchase a VESA wall mount that has mounting measurements of200mm horizontally and 100mm vertically for model L26W11; and onethat has mounting measurements of 400mm horizontally and 200mmvertically for model L32W11.To attach the plate:1. If your TV is attached to the base, you need to remove it first inorder to attach the plate.A. Place the TV facedown on a surface that is soft, yet strongenough to hold the TV.B. Remove the two jack panel covers by pushing up on the tabsand pulling the covers out carefully.C. Use a screwdriver to remove the screws from the four holes oneach side of the TV’s base as the arrows indicate on the base.2. Make sure all devices are already connected, then put the coversback into place over the jack panels.3. Locate the wall mount plate.4. Hold the plate so the printing is upright and facing you.Determine the holes to use for your model as indicated on thegraphic to the left. The holes for your model are in the samelocation on each corner of the plate. Attach the plate to the backof the TV with four of the eight screws used to attach the base.5. Follow the directions included with the wall mount to mount theTV to the wall.Attach plate using these holes.Attach plate using these holes.Remove the two jack covers to remove thebase.Remove the screws from the four holes oneach side of the TV’s base.L26W11L32W11