RCA L26W11 User Manual

Connections and SetupChapter 1 5VGAAUDIO YPb/CbPr/Cr L R R L VID1 R L VID2VGA ANTCOMPONENT VIDEOYPbPr VIDEOINPUTL RAUDIOVIDEOOUTPUTS-VIDEOOUTS-VIDEOINL RAUDIOL RAUDIOTV right back panelCABLEOFF-AIR ANTENNAORAUDIOCMPT INPUTAUDIO1S-VIDAUDIO2GreenBlueRedComponent Videocables (Y Pb Pr) arecolor coded- Green,Blue and RedWhiteRedAudio cables are colorcoded- Red= right audio;white= left audio12 3Y Pb/Cb Pr/Cr ConnectionConnecting the DeviceThis connection allows you to connect a device that has Y Pb/Cb Pr/Cr jacks, for example, aDVD player. The TV’s Component jacks can recognize if the device you’re connecting to isY Pb Pr compatible or Y Cb Cr compatible. If the device you are connecting also has S-Videoor composite video, we recommend you use the component video input for better quality.Using the example of a DVD player:1. Connect your cable or off-air antenna to the TV’s ANT input.2. Connect Y Pb Pr component video cables.Connect three video grade cables to the Component (CMPT) Y Pb/Cb Pr/Cr jacks on theback of the TV and to the Y Pb Pr or Y Cb Cr outputs on the DVD player.3. Connect your audio cables.Connect the audio (white and red) cables to the R and L AUDIO jacks on the back of theTV and to the Audio Output jacks on the DVD player.Viewing the Picture from the Connected DeviceThe device in this connection is connected to the TV’s Component jacks. To view this device:1. Plug in the TV (see page 8 for details) and the device, if they aren’t already plugged in.Turn on the TV and the device you want to view.2. Press the INPUT button on the remote control to scroll through the Video Input Channelsuntil you see CMPT displayed in the channel banner.