RCA R52WM24 User Manual

Also see for R52WM24: User guide Specifications

Contents

Connections & SetupChapter 1 11Plug in the HD MonitorPlug the fl at end of the cable into the power jack on the back of the HD Monitor.Then plug the other end of the power cord into an appropriate wall outlet. Besure to insert the plug completely. Do not plug the HD Monitor into an outletcontrolled by a light switch.Put batteries in the remote• Remove the battery compartment cover from the back of the remote bypushing the tab and lifting off the cover.• Insert 2 fresh batteries. Make sure the polarities (+ and -) are aligned correctly.• Replace the cover.How to Use the Remote Control toComplete the Initial SetupThe technical term is “Navigation” – how you move through the on-screen menus.The theory is the same throughout the menu screens: highlight your choice andselect it.To highlight a menu item, press the arrow buttons on the remote to highlight oneof the items listed on the screen. Use the up or down arrow button to move up ordown. Use the right or left arrow button to move right or left.To select the item that you’ve highlighted, press OK.Note: Highlighted means that the menu item stands out from other menuitems on the list (appears darker, brighter, or a different color).Turn on the HD MonitorPress TV on the remote, or press the Power button on the HD Monitor’s frontpanel.Note: Pressing the TV button turns on the HD Monitor and puts the remoteinto TV mode. “TV mode” means that the buttons on the remote controloperate the HD Monitor’s functions.DVDAUX•HD TVCHON•OFFCLEAR MENUokMUTEVOLGO BACKTV buttonArrowsOKbuttonMENUok