RCA R52WM24 User Manual

Also see for R52WM24: User guide Specifications

Contents

Using the HD Monitor’s Features22 Chapter 3Channel BannerThere are several indicators that might appear when you press the TV or INFObutton on the remote. The list at the bottom of this page describes the items onthe Channel Banner screen (left to right and top to bottom).4/3 format Current screen format. Press the FORMAT button onthe remote control to change this setting.Stereo (or Dual) Current sound type. Dual means that the HDDual means that the HDDualMonitor will take both mono and stereo signals.Parental Controls are locked. See page 30 forinformation on how to change this setting.CC Shows that Closed Captioning is available for thecurrent input signal.03:45 pm Current time.VID1 Current input. Press the INPUT button on the remoteto move to a different input.Commercial skip 0:30 Shows the time remaining on the commercial skip(SKIP) timer.Sound is muted. Press the MUTE button to unmutethe sound.Sample channel banner4/3 format Stereo cc 03:45 pmVID1Commercial skip 0:30Your remote's device buttonsTVON•OFFDVDAUX•HDAutotuningThe autotuning feature automatically tunes the HD Monitor to the correct inputfor different devices you have connected to your HD Monitor (like a VCR, DVDplayer, etc.) When you set up autotuning in the menu system you don’t have toremember to change your HD Monitor to the CMP1 input, for example, whenyou want to watch a DVD on your DVD player.Why You Should Use the Autotuning FeatureAutotuning lets you go directly to the input you assign to a device button. Forexample, if you have a DVD player connected to the CMP1 input, you can havethe autotuning feature go directly to the CMP1 input when you press the DVDbutton (instead of going through the inputs until you fi nd the DVD signal).