16 Chapter 2Using the Remote ControlThe Buttons on the Remote Control(0-9) Number Buttons Enter time settings directly with the remote control. Thenumber buttons may also work with other devices if the remote control is programmedto control those devices.ANTENNA In VCR mode (if programmed), this button works as a TV/VCR button forsome VCRs. In SAT mode (if programmed), this button works as a TV/SAT button forsome satellite receivers.Arrows Used to highlight different items in the HD Monitor menu and to adjust themenu controls.AUX•HD Puts the remote in AUX/HD mode. As a default, this button controls somemodels of RCA HDTV Tuners. It can also be programmed to operate some brands ofother remote-controllable devices.CC Displays a reduced Closed Captioning menu, allowing you to turn closedcaptioning on and off or change the closed captioning mode. Use the up and downarrow buttons to highlight the setting you want to change. Use the left and right arrowbuttons to change the highlighted setting.CH + or CH - Scans up or down through the HD Monitor's input list. The CH buttonsmay also work with other devices if the remote control is programmed to control thosedevices. In DVD mode (if programmed), these buttons work as chapter advance orchapter reverse buttons with some DVD players.CLEAR Removes any menu or display from the screen and returns you to normalCLEAR Removes any menu or display from the screen and returns you to normalCLEARviewing.DVD Puts the remote in DVD mode and, if Autotuning is enabled, will turn on the HDMonitor and tune to the correct input channel.FORMAT Changes the current format (aspect ratio and magnifi cation) of the image onthe screen.FREEZE In TV mode, the FREEZE button freezes the picture on some input signals.Press any button on the remote to resume normal viewing. The FREEZE featureautomatically times out after a short time. Please note that when you "unfreeze" you goback to live programming (skipping any programming that occurred during the freeze).Note: The FREEZE feature does not work on signals from the DVI-HDTV or CMP1inputs in progressive scan (480p) or HDTV (1080i) modes.Do not use the Freeze feature for an extended period of time. This can cause theimage to be permanently imprinted on the picture tube. Such damage is not coveredby your warranty. Press any button to unfreeze the picture at any time.GO BACK Returns you to the previous input channel.GO BACK Returns you to the previous input channel.GO BACKGUIDE Brings up the Channel Guide menu.Channel Guide menu.Channel GuideIndicator Indicates the programming mode when programming the remote to controldevices. The indicator lights up when you press a valid button on the remote. It fl ickerswhen the remote batteries are low and you press a button.INFO Brings up channel banner; press again to clear the screen.INPUT Press to toggle through the available input sources (VID1, VID2, FRNT, CMP1and DVI).MENU Brings up the Main menu.MENU Brings up the Main menu.MENUIndicatorFORMATFORMATFORMADVDAUX•HD TVCHON•OFFCLEAR MENUINFOSKIPRECORD STOP PAUSEPAUSEPFORWARDPLAYPLAYPLAREVERSEANTENNA1 2 34 5 67 8 90okPRESETSGUIDEMUTEVOLINPUTGO BACKCCSLEEPFREEZE