RCA R52WM24 User Manual

Also see for R52WM24: User guide Specifications

Contents

Connections & Setup12 Chapter 1TipTo access the setup menus manually, pressMENU and choose SETUP.EnglishFrançaisEspañolWelcome ScreenThe next screen welcomes you to your new RCA HD Monitor. Press OK tocontinue with the setup.Sit back, relax and enjoy the vividcolors, realistic pictures, andsurround sound of your new RCA TV.Press OK to continueComplete the Initial SetupThe menu system in your HD Monitor allows the HD Monitor’s features to workproperly. The fi rst time you turn on your HD Monitor, the setup screens appear.Set the Menu LanguageThe fi rst part of the setup allows you to select your preferred language for themenu system.If English is your preferred language, press OK. If you want to choose anotherlanguage, press the down arrow button until that language is highlighted, andpress OK.Automatic ConvergenceYour HD Monitor’s picture tubes might have been disturbed during delivery orafter you moved the HD Monitor, causing the color in your HD Monitor to beout of alignment. The colors adjust by starting auto convergence.IMPORTANT: Auto convergence works best once the HD Monitor haswarmed up for at least an hour. If you've just unpacked your HD Monitor,it's a good idea to repeat the Auto convergence function when theHD Monitor's been running for at least an hour. See page 38 for moreinformation about Auto convergence.1. Press OK to begin auto convergence.2. When the auto convergence is complete, the Red center convergence menuRed center convergence menuRed center convergenceappears. The cross in the middle of the screen should be yellow. If it is not,use the arrow buttons to move the red cross to overlap the green cross.Press OK when adjustments are complete.3. The Blue center convergence menu appears with a cyan cross in the middleBlue center convergence menu appears with a cyan cross in the middleBlue center convergenceof the screen. If it is not, use the arrow buttons to move the blue cross tooverlap the green cross. Press OK.Note:If you're using an HD source (such as a separateHDTV tuner or HDTV satellite receiver) onthe CMP or DVI input, you should run Autoconvergence separately for that input as well.Tune to the input you’re using for the HDsource, then go to page 38 for information onAuto convergence.Go backAutomatic convergence ...Press < or > key to launch the automaticconvergence. The process takes about 1 min.Pressing OK before the end will stop theprocess and keep old settings.