RCA R52WM24 User Manual

Also see for R52WM24: User guide Specifications

Contents

32 Chapter 4Using the Menu SystemSound MenuThe Sound menu lets you adjust audio output. To access the Sound menu, pressMENU on the remote, and then select Sound from the main menu.This section describes the items available in the Sound menu.Sound settings The Sound settings submenu contains the following items:Sound settings submenu contains the following items:Sound settingsLeft & Right balance Use the left or right arrow button to center the barLeft & Right balance Use the left or right arrow button to center the barLeft & Right balanceunder the arrow to balance the left and right speakers.Amplifi er Use the left or right arrow button to selectAmplifi er Use the left or right arrow button to selectAmplifi er External (if your HDMonitor is using external amplifi er only) or Internal (if your HD Monitor isusing the speakers in the HD Monitor).Subwoofer Set the HD Monitor’s subwoofer toSubwoofer Set the HD Monitor’s subwoofer toSubwoofer External, if the HD Monitoris using an external subwoofer; or None.Sound type Press the right arrow button to scroll through the available audiotype Press the right arrow button to scroll through the available audiotypetypes, which control the way the sound comes through your speakers. Theoptions available vary according to the input selected.Stereo Splits the incoming stereo audio signal into left and right channels.Most TV programs and recorded materials have stereo audio. The wordStereo appears in the channel banner when you tune to a program that isbroadcast in stereo.Left andLeft andLeft Right Isolates either the left or right channel of the incomingRight Isolates either the left or right channel of the incomingRightaudio.Sound Mode Press the right arrow button to scroll through the available audioMode Press the right arrow button to scroll through the available audioModemodes, which provide special processing through your speakers (depending onthe setting you chose as your Sound type).Sound type).Sound typeNormal Does not give any special processing, simply provides the monoNormal Does not give any special processing, simply provides the monoNormalor stereo sound provided by the signal you're watching.Wide Available only for mono signals. “Widens” sound from monoWide Available only for mono signals. “Widens” sound from monoWidebroadcasts and mono devices connected to your HD Monitor for a fuller,more spacious sound.Magic Available only for stereo signals. Gives a surround effect with moreMagic Available only for stereo signals. Gives a surround effect with moreMagicbass.Sound logic Reduces the annoying blasts in volume during commerciallogic Reduces the annoying blasts in volume during commerciallogicbreaks, and also amplifi es softer sounds in program material. Eliminates theneed to constantly adjust the volume.Dynamic bass Enhances your HD Monitor's low-frequency response. Theoptions are Off,Off,Off Medium and High.Go backSound settingsSound typeSound modeSound logicDynamic bassHeadphone settingsGraphic equalizer...Stereo...Normal...Medium.........SoundGo backLeft & Right balanceAmplifierSubwooferExternal...External...Settings