RCA RCU1010 User Manual

Also see for RCU1010: Quick start guide

RCA RCU1010 User Manual Manual pdf 3 page image

3Congratulations on your purchase of the RCU1010. This unit is one of the most sophisticated, yeteasy to use, remote controls available today. With the RCU1010, juggling multiple remote controls isa thing of the past! This one unit controls up to nine components, including the most popular brandsof TV, VCR, DVD, PVR, SAT/CBL, CD and AUDIO equipment. The RCU1010 has the ability to learncommands from your existing remotes, and the Smart Macro feature allows multiple commands tobe executed with a single keypress. The RCU1010 is easy to use, easy to program, and it gives youtotal control—at the touch of your fingertips!Universal Learning Remotewith TouchscreenBattery InformationYour RCU1010 Universal Learning Remote with Touchscreen requires four AAA alkaline batteries(sold separately).Battery InstallationTo install the batteries:1. Turn the unit over, push on the tab and slide the cover down.2. Insert the batteries, matching the batteries to the (+) and (-) marks inside the battery case.3. Slide the battery cover back into place.Battery SaverYour RCU1010 saves battery power by automatically turning off if any key is pressed for morethan 30 seconds. This saves your batteries should your remote get stuck in a place where the keysremain depressed, such as under a book or between the sofa cushions.Code SaverWith the RCU1010, you don’t have to worry about losing programmed information whenyou change batteries. All programmed parameters are retained indefinitely in the event ofbattery replacement.Power-on DefaultWhen you replace batteries, your RCU1010 remote always powers on in the TV Mode. If yourTV, VCR or satellite receiver are RCA, PROSCAN or GE brands, you may not even need to setup the RCU1010 to control them. In these instances, the remote should work as soon as thebatteries are installed.