RCA RCU430D User Manual

Contents

RCA RCU430D User Manual Manual pdf 5 page image

5(OFF)08 975 642 31SPOWERTV CODEProgram for TV—Direct Entry Method1. Manually turn on the TV.2. Locate the enclosed TV Code List.Find your brand of TV.Note: If your brand isn’t listed,use one of the Code Search methodsto program this remote control.(See the section on Code Search)3. Press and hold the CODE SEARCHkey until the indicator lightilluminates. Then release theCODE SEARCH key.4. Press and release the TV key.The indicator light blinks and thenremains lit.5. Use the number keys to enterthe first code listed for your brand.After you enter a valid three-digitcode, the indicator light turns off.Note: If you enter an invalid code,the LED will flash rapidly for 2seconds. Start over at step 3.6. Aim the remote at your TV and pressthe POWER key. If your TV turnsoff, you have found the correct code.7. If your TV doesn't turn off, repeatsteps 3-6 above, entering the nextcode for your brand.If none of the codes work or yourbrand is not listed, use one of theCode Search methods to programthis remote. (See the section onCode Search).8. With your TV on, press theCHANNEL UP key. If the TVresponds, no further programmingis required.Most RCA, GE and PROSCANTVs will not require programming.Check to see if your TV respondsto the remote before youbegin programming.9. Enter the code in the box providedon this page for future reference.In order for the 3 component universal remote to controlyour TV, you must program it with the TV code that matchesyour TV. These instructions explain the preferred methodof programming the remote—the Direct Entry method. Toprogram your remote to control your TV, follow these steps:CODESEARCHINDICATORLIGHT(BLINK)TVCHANNELRCU430D_US_IB_REVC 7/16/03 15:22 Page 5