RCA RCU430D User Manual

Contents

RCA RCU430D User Manual Manual pdf 6 page image

6Program for VCR or DVD—Direct Entry MethodVCR•DVD1. Manually turn on the VCR or DVD.2. Locate the enclosed VCR or DVDCode List. Find your brand in theVCR or DVD Codes.Note: If your brand isn’t listed, useone of the Code Search methods toprogram this remote control. (Seesection on Code Search on page 8).3. Press and hold the CODE SEARCHkey until the indicator lightilluminates. Then release the CODESEARCH key.4. Press and release the VCR•DVD key.The indicator light blinks and thenremains lit.5. Use the number keys on the remoteto enter the first code listed for yourbrand. After you enter a valid three-digit code, the indicator light turns off.Note: If you enter an invalid code, theLED flashes rapidly for two seconds.Start over at step 3.6. Aim the remote at the component.Press the POWER key. If your VCR orDVD player turns off, you have foundthe correct code.7. If your VCR or DVD does not turnoff, repeat steps 3-6 above, enteringthe next code for your brand.If none of the codes work or yourbrand is not listed, use one of theCode Search methods to programthis remote. (See Code Search sectionon page 8).8. With your VCR or DVD on, pressthe CHANNEL UP key. If the VCRor DVD responds, no furtherprogramming is required.9. Enter the code in the box providedon this page for future reference.POWERIn order for the three-component universal remote to controlyour VCR or DVD, you must program it with the code thatmatches your component. Most RCA, GE and PROSCANVCRs or DVDs do not require programming. Check to see ifyour VCR or DVD responds to the remote before you beginprogramming. To program your remote to control your VCRor DVD, follow these steps:(BLINK)(OFF)08 975 642 31CODESEARCHINDICATORLIGHTVCR OR DVD CODECHANNELRCU430D_US_IB_REVC 7/16/03 15:22 Page 6