8Code Search MethodsManual Code Search1. Turn on the component youwant the remote to operate.2. Press and hold the CODE SEARCHkey until the indicator lightilluminates. Then release theCODE SEARCH key.3. Press and release the component keythat corresponds to the componentyou want the remote to operate(TV, VCR•DVD or DBS•CABLE).The indicator light blinks onceand then remains lit.4. Aim the remote at the component andpress the POWER key continuouslyuntil the component turns off.Important: Because there are so manycodes, you may have to press thePOWER key many times—possiblyup to 200 times.5. When the component turns off, pressthe ENTER key to store the code.6. Use Code Retrieval on the nextpage to identify the code for yourcomponent for future reference.If your component’s brand isn’t listed in the Code List oryou have tried all of the codes for your brand and the remotedoes not operate your component, use one of the Code Searchmethods below—Manual Code Search or Auto Code Search.Both Code Search methods search all of the codes becauseyour component’s code may be listed under another brandin the code list.Note: The Code Search method may take a long time becausethe remote searches all of the codes in its memory for thecode which operates your component. Therefore, if yourbrand is listed in the Code List, use the Direct Entry methoddescribed on pages 5-7.DBS•CABLEVCR•DVDTVAuto Code Search1. Turn on the component youwant the remote to operate.2. Press and hold the CODE SEARCHkey until the indicator lightilluminates. Then release the CODESEARCH key.3. Press and release the component keythat corresponds to the componentyou want the remote to operate(TV, VCR•DVD or DBS•CABLE).The indicator light blinks onceand then remains lit.INDICATORLIGHTCODESEARCH(BLINK)INDICATORLIGHTCODESEARCHENTERDBS•CABLEVCR•DVDTVPOWERRCU430D_US_IB_REVC 7/16/03 15:22 Page 8