Radio Shack 2000629 User Manual

Contents

8Operation9OperationSelecting and Tuning a WavebandYou can choose from four wavebands: FM, AM, SW, LW.Waveband Frequency coverage AntennaFM 87.5 – 108 MHZ Fully extend the telescopic antenna; angleand rotate for best reception.AM 520 – 1710 kHz InternalSW (short wave) 1711 – 29999 kHz Fully extend the telescopic antenna; angleand rotate for best reception.LW (long wave) 153 – 279 kHz InternalShortwave Meter Band1. Turn on the radio.2. Press BAND to select SW waveband.3. Press SW SELECT button to select the required SW meter band. The radio displays theSW frequency.n Note: This radio covers SW 120 to 11 meter bands.Direct Tuning1. Turn on the radio.2. Press BAND to select a waveband.3. Press ; the radio displays ---- .4. Enter the station number, then press to confirm.n Note: Make sure you enter the correct number, otherwise the radio will switch to anotherwaveband.5. Extend the antenna fully and rotate for best reception.Manual Tuning1. Press BAND to select a waveband.2. Press / or turn the tuning knob to tune to the desired frequency.Press the tuning knob to fine tune.Press any other button to exit fine tuning.Band FM AM LW SWTune 100/200 kHz 9/10 kHz 9 kHz 5 kHzFine Tune 50 kHz 1 kHz 1 kHz 1 kHz