MeshGuard User’s GuideSettings can be changed as follows:1. When a menu is selected, it flashes between two screens. Forexample:2. Press [MODE] to exit Program Mode and return to Detection Mode,or press [N/-] to advance to the next menu.3. Press [Y/+] to enter. The LCD displays “go.”5.3.2 Exiting Programming ModeYou may exit Programming Mode anytime and return to Detection Modein either of these two ways:1. Press [MODE]. MeshGuard exits Program Mode and shows thecurrent reading in Detection Mode.2. Do not press any buttons for 1 minute. MeshGuard automaticallyexits Programming Mode and returns to Detection Mode,showing the current reading.20
