Rae MeshGuard User Manual
                                                    | |
Contents
| 
MeshGuard User’s Guide5.3.11 Fixed or Portable Operation SelectionThe next menu is for setting the MeshGuard for fixed or portableoperation. In Portable Mode, STEL, TWA, and Peak readings areincluded.“SEt” and “ Ptb” flash in alternation, to indicate that the MeshGuard cannow be set as fixed or portable. The default value is “fixed.”Press [Y/+] to enter and change the setting, [MODE] to exit and return toDetection Mode, or [N/-] to go to the next menu.The LCD displays the current value (enabled or disabled). Change thevalue if necessary.Note: “dIS” means fixed (Portable Mode disabled) and “En” meansportable (Portable Mode enabled).5.3.12 Radio Enable/DisableThe next menu is for setting turning the MeshGuard’s radio on or off.“SEt” and “ rdo” flash in alternation, to indicate that the MeshGuardradio can be turned on (enabled) or off (disabled). The default value is“on.”32 |
Related manuals for Rae FTD-2000
manualsdatabase
Your AI-powered manual search engine