MeshGuard User’s GuidePress [Y/+] to enter and change the setting, [MODE] to exit and return toDetection Mode, or [N/-] to go to the next menu.The LCD displays the current value (enabled or disabled). Change thevalue if necessary.Note: “dIS” means disabled (radio off) and “En” means on (radio on).5.3.13 Change Communication IntervalThis menu allows you to change the interval between wirelesstransmissions. “SET” and “ItUL” flash, to indicate that you can changethe interval. The interval can be set to 10, 30, 60, 300, or 600 seconds.Note: The default interval is 30 seconds.Press [Y/+] to enter and change the setting, [MODE] to exit and return toDetection Mode, or [N/-] to advance to the next MENU.33
